Cerchi qualcosa dal sito DE? Possiamo procurarti ogni cosa !!!
Adattatore variabile 2" Ingrandisci

Adattatore variabile 2"

TS Optics

TS-Optics eyepiece projection adaptor deluxe 2" to 1.25"

Maggiori dettagli

TSVPA2

Disponibilità: in pronta consegna

o·o·o

89,00 € 89 EUR

» Aggiungi alla mia lista dei desideri

Codice articolo: TSVPA2

Variable eyepiece projection adaptor for large 1.25" eyepieces
2" telescope adaptation

  TS-Optics eyepiece projection adaptor deluxe 2" to 1.25" [EN]

 

 

The Deluxe Projection Adaptor is a particularly high quality solution for all telescopes with 2" focuser.

It accepts most eyepieces with 1.25" barrel, including medium sized eyepieces that would not fit into a regular projection adaptor (maximum overall eyepiece diameter: 45 mm). Examples of this would be 32mm Super Plossls or 1.25" WA eyepieces.

The VPA2 is a modular adaptor. Each of its individual parts can be very valuable on its own! (See below)

Advantages of the TS VPA 2:
-- You can use almost all 1.25" eyepieces, in particular those with a slightly larger body than normal.
-- The T2 adaptation can be extended for fine-tuning of the projection distance. A larger distance translates into a stronger
zoom factor.
-- The eyepiece can be locked with two locking screws that tighten a compression ring.
-- The individual components of this adaptor have a lot of additional applications.

The TS VPA 2 consists of the following components:

  TS-Optics eyepiece projection adaptor deluxe 2" to 1.25" [EN]

The individual components that make up the TSVPA2 ... from left to right:

Adaptor from 2" to 1.25" with integrated T2 thread and compression ring

Adaptor from T2 to 2" with compression ring. Allows you to attach 2" accessories to adaptors with T2 thread

Adaptor from 2" to T2 - prime focus adaptor for adaptation of T2 accessories to 2" focusers

 

Assembling the VPA adaptor:

Step 1:
Screw the T2-2" adaptor onto the 2"-1.25" adaptor with integrated T2 thread.

  TS-Optics eyepiece projection adaptor deluxe 2" to 1.25" [EN]

Step 2:
Insert the projection eyepiece and clamp it. If the eyepiece has a rubber eyeguard we recommend removing this eyeguard.

  TS-Optics eyepiece projection adaptor deluxe 2" to 1.25" [EN]

Step 3:
Insert the 2"-T2 adaptor on top of the eyepiece and clamp it with the locking screw of the central part.

Hands-on advice from Teleskop-Service:

Classical Projection Photography with cameras without objective lens:
With any given projection eyepiece the zoom factor is increased with growing distance between the eyepiece and the camera's sensor. We recommend to avoid extremes: A too short distance might cause vignetting towards the edge, a too big distance will render a too high magnification. We recommend projection eyepieces between 9mm and 15mm focal length.

A-focal imaging with compact digital cameras with objective:
For this kind of photography the camera's lens needs to be moved as closely as possible to the exit lens of the eyepiece. The eyepiece needs to have as large as possible lens diameter. Both factors combined will optimize the field illumination.

  TS-Optics eyepiece projection adaptor deluxe 2" to 1.25" [EN]


Tip for the eyepiece adaptation:
If your eyepiece has a rubber eyeguard we recommend to remove this eyeguard. Often this allows to move the T2 thread closer to the eyepiece.

Carrello  

Nessun prodotto

0,00 € Spedizione
0,00 € Totale

Carrello Check out

Contattaci
Questo sito utilizza i cookie allo solo scopo di garantirti una navigazione ottimale e per fini statistici di monitoraggio. I cookie adottati sono solo quelli necessari per usufruire di tutti i servizi offerti (fornitore: teleskop-express.it) e quelli forniti da terze parti (Google Analytics). Proseguendo con la navigazione, accetti l'utilizzo dei cookie.

maggiori dettagli
OK
Prosegui con i soli Cookie necessari