
Ingrandisci TS-Optics 0.82x field of view corrector/reducer for 76mm
Teleskop Service
- Rimuovi questo prodotto dai miei preferiti
- Aggiungi questo prodotto ai miei preferiti.
- Stampa

Ingrandisci Codice articolo: TSRED76
The reducer is optimized for the TS 76mm f/5.5 APO and corrects the field of view for astrophotography up to full frame sensor.
![The reducer is optimized for the TS 76mm f/5.5 APO and corrects the field of view for astrophotography up to full frame sensor. [EN] The reducer is optimized for the TS 76mm f/5.5 APO and corrects the field of view for astrophotography up to full frame sensor. [EN]](https://www.teleskop-express.it/img/cms/ts-76edph-flatfield-korrektor-m48-1000.jpg)
![The reducer is optimized for the TS 76mm f/5.5 APO and corrects the field of view for astrophotography up to full frame sensor. [EN] The reducer is optimized for the TS 76mm f/5.5 APO and corrects the field of view for astrophotography up to full frame sensor. [EN]](https://www.teleskop-express.it/img/cms/ts-76edph-flatfield-korrektor-1000.jpg)
♦ Reduction factor 0.82x
♦ 360° rotation
♦ Internal thread for 2" filter available in front of the camera
♦ 55mm working distance from M48 thread on camera side
♦ Connection to the telescope via M74 thread
The corrector was developed for the TS 76mm f/5.5 Apo. But the correction is also very good for other refractors with 350mm to 450mm focal length. The 3-element design provides sharpness and contrast to the corners of the image field.
The corrector has a M74x1 male thread for adaptation to the focuser. The part of the housing that is recessed into the focuser tube has a diameter of 70.5 mm. Therefore, the focuser tube must have an inner diameter of 71 mm or more. We offer an individual adaptation to eyepiece focusers with a large internal thread, the corresponding article (article number Sonder105) is linked in the accessories section.
On the camera side, the corrector offers 360° rotation. Removing the top reveals an M48x0.75 female thread where you can screw in 2" nebula filters.
The working distance from the M48x0.75 thread on the camera side to the sensor is 55 mm.
Specifiche Tecniche:
| Lenses: | 3-element design with one ED element |
| Connection telescope side: | M74x1 male thread |
| Connection camera side: | M48x0,75 thread |
| Working distance: | 55 mm |
| Weight: | 550 g |
