TS Riduttore e correttore 0.6x per rifrattori Ingrandisci

TS Riduttore e correttore 0.6x per rifrattori

Teleskop Service

The corrector flattens the image field and improves the light intensity of refractors for astrophotography. It can be plugged or screwed in.

Maggiori dettagli

WiRed06

Disponibilità 3-4 gg lavorativi+ tempo di trasporto

o·o·o

245,00 € 245 EUR 2024-06-09

» Aggiungi alla mia lista dei desideri

Codice articolo: WiRed06

The corrector flattens the image field and improves the light intensity of refractors for astrophotography. It can be plugged or screwed in.
♦ Suitable for all refractors with 2" focusers or larger.

♦ Ideally suited for cameras with sensors up to 30 mm diameter

♦ Connection on the telescope side via 2" barrel with filter thread or via the M54x1 female thread on the corrector.

♦ Connection adapters for screw adaptations are available, e.g. to M48, M54x0.75, M63 or M68 (# Sonder65)

♦ Connection thread on camera side via T2 male thread and via M55x0.75 male thread

♦ Working distance from T2 thread is 55 mm and from M55x0.75 thread is 62,5 mm

 

 The corrector flattens the image field and improves the light intensity of refractors for astrophotography. It can be plugged or screwed in. [EN]

 The corrector flattens the image field and improves the light intensity of refractors for astrophotography. It can be plugged or screwed in. [EN]

TS 0.6x corrector for astrophotography through refractor telescopes

The corrector provides good illumination and correction for sensors with APS-C format or for astro cameras up to approx. 30 mm sensor diameter. It is suitable for all refractor telescopes and offers a simple 2" barrel with filter thread.

Amateur astronomers who prefer a screw connection can unscrew the 2" barrel and make an individual adaptation via the M54x1 female thread on the corrector. We offer an adaptation to the connection thread of your focuser via our special adapters.

The corrector offers the T2 (M42x0.75) male thread on the camera side and the standard working distance of 55 mm. All common mirrorless system cameras, DSLR and astro cameras offer an adaptation to T2 with this working distance. For an individual adaptation, the M55x0.75 male thread is still available on the corrector. To do this, simply unscrew the T2 adapter. The working distance then increases from 55 mm to 62.5 mm.

  The corrector flattens the image field and improves the light intensity of refractors for astrophotography. It can be plugged or screwed in. [EN]

Specifiche tecniche:

Design: Corrector with focal length reduction
Lenses: 2-element design
Coating: Multi-coating on each lens surface
Connection telescope side: 2" barrel and M54x1 female thread
Connection camera side: T2 (M42x0.75) male thread and M55x0.75 male thread
Working distance: 55 mm from T2 thread and 62.5 mm from M55 thread
Weight: 170 gram

Carrello  

Nessun prodotto

0,00 € Spedizione
0,00 € Totale

Carrello Check out

Contattaci